Products Category

Rated power (KW): 0.75 Rated current (A): 5.0 Input power requirement: single-phase 220VAC (180-224VAC) 50HZ/60HZ Frequency range: 0.5-400.00Hz Frequency setting: button, external potentiometer or 0-10V Modulation mode: SVPWM Carrier frequency: 1-10KHZ Acceleration and deceleration time: 0.1-6550.0 seconds

Brake positioning error <0.5mm Configured with a special external operator for terminal machines, it is more suitable for use with terminal machines Through the D176 parameter setting of the inverter, single-shot and continuous-shot working states can be easily set The setting range of continuous-shot times is expanded to 40, which is more convenient to use

This controller is a special controller for laboratory instruments, with built-in forward and reverse rotation and speed setting functions. It has the characteristics of compact structure, beautiful workmanship, easy installation and use, practical and flexible functions, simple operation, high reliability, strong anti-interference ability, and economical and affordable.

This controller is designed for the medical device industry and has built-in forward, reverse and speed setting functions.

This controller is a special controller for laboratory instruments, with built-in forward and reverse rotation and speed setting functions. It has the characteristics of compact structure, beautiful workmanship, easy installation and use, practical and flexible functions, simple operation, high reliability, strong anti-interference ability, and economical and affordable.

Input Voltage range: single-phase 220V±15% Frequency range 50/60Hz (±5%) Operation function Start: 485 communication start Stop: 485 communication stop Memory function: automatic memory after power failure Protection function: undervoltage, overvoltage, overcurrent, sensor abnormality, etc.

The OS1-4S2F fully digital servo controller is an electronic yarn-guided driver for winding machine equipment in the textile machinery industry. It has a friendly human-machine interface and can drive five motors at the same time, including an AC servo motor, an AC asynchronous motor with a built-in encoder, a DC brushless motor and two stepper motors. The system integrates common functions such as spinning length measurement, yarn break detection, winding diameter detection and tension detection required by the winding machine. At the same time, servo control technology is applied to this system. Electronic gear and electronic cam technology are built...

Oriental Wisdom OSC series low voltage servo controller is a fully digital AC servo driver, which adopts FOC magnetic field oriented control and SVPWM space vector modulation technology, supports pulse, analog, IO trigger, 485 protocol and other control methods, can drive 50-400W low voltage AC servo motor, software algorithm processing. OSC series low voltage AC servo driver is easy to install and simple to debug. It is suitable for logistics sorting, AGV, inkjet printer, small and medium-sized engraving machine, textile machinery, packaging machinery and other equipment.

Input Voltage range 220V±15% Frequency range 50/60Hz (±5%) Output Voltage range Three-phase 0~220V Frequency range 10.00~150.0Hz (frequency resolution 0.01Hz) Overload capacity 150% rated output, 60S Control mode Frequency setting accuracy Digital setting: 0.01Hz Modulation mode Optimized space vector modulation V/F curve 18 compensation curves PI regulation Built-in PI regulator for automatic control

Rated power (KW): 0.75 Rated current (A): 5.0 Input power requirement: single-phase 220VAC (180-224VAC) 50HZ/60HZ Frequency range: 0.5-400.00Hz Frequency setting: button, external potentiometer or 0-10V Modulation mode: SVPWM Carrier frequency: 1-10KHZ Acceleration and deceleration time: 0.1-6550.0 seconds